Unidrive SP - The Solutions Platform
The Unidrive  provides application and system
designers with an incredibly flexible drive platform, which is
easily modified by an extensive range of sophisticated
SM option modules that can be used singly or in combination
for economical and space saving solutions. SM option
modules install easily into any of the three option slots,
with no tools required.The I/O, feedback, memory,
communication and application modules enable the Unidrive to provide an optimised solution regardless of the
demands of the application.
A complete range of other
accessories are available to simplify system integration and
meet system design criteria.
Options At-A Glance
| Order Code |
| Drive Configuration and Programming |
Cloning and Programme Storage Card |
Smart Card *** |
| Configuration Tool |
CTSoft *** |
| Communications Cable |
CT Comms Cable |
| Operator Interface |
No Keypad |
As standard |
| LED Keypad |
SM-Keypad |
| Backlit LCD Keypad |
SM-Keypad Plus |
| Opertaor Interfaces HMI details |
See products for details |
| Power Accessories |
Internal Fitting Brake Resistor |
SM - Heatsink DBR |
Panel Mounting DB Resistors
E Stop Duty |
To fit drive |
Wall Mounting DB Resistors
Cyclic Duty |
To fit drive |
| Internal Fitting EMC Filter |
As standard |
| External Fitting EMC Filters |
To fit drive |
| Motor Feedback |
Universal Encoder Feedback |
SM-Universal
Encoder Plus |
| Second Encoder Feedback |
SM-Encoder Plus |
| Resolver Input Feedback |
SM-Resolver** |
| Encoder Terminal Connector |
SM-ETC |
| Input/Output |
Extra I/O |
SM-I/O Lite |
| Extra I/O with Real Time Clock |
SM-I/O Timer |
| Extended I/O |
SM-I/O Plus |
| Double Insulated Extended I/O |
SM-I/O PELV |
| 24V Protected I/O |
SM-I/O 24V |
| 120V I/O |
SM-I/O 120V |
| Remote Network I/O |
Beckhoff I/O |
| Communication |
Modbus RTU (Standard) |
SM-Applications* |
| PROFIBUS-DP |
SM-PROFIBUS-DP |
| INTERBUS |
SM-INTERBUS |
| DeviceNet |
SM-DeviceNet |
| CTNet |
SM-Applications |
| CAN Interface |
SM-CAN |
| CANopen |
SM-CANopen |
| Interface |
SM-SLM |
| SERCOS |
SM-SERCOS |
| Ethernet |
SM-Ethernet |
Application
Co-processor Modules |
System Programming |
SM-Applications |
| System Programming |
SM-Applications Lite |
| Motion Made Easy |
SM-EZMotion** |
| Application Programming Software |
SyPTLite (IEC61131-3) |
Free with Unidrive  |
| SyPTPro (IEC61131-3) |
SyPTPro |
| PowerTools Pro |
Free download |
| Solutions Software |
Dual Mode Winder |
SSP-4000-0010 |
| Flying Shear Control |
SSP-4000-0020 |
| Fan and Pump Duty Assist |
SSP-4000-0030 |
* Provides additional Modbus RTU port.
** Only one of these modules per drive.
*** Supplied as standard with Unidrive 
|
DRIVE CONFIGURATION AND
PROGRAMMING
This is a standard feature that enables simple configuration of
parameters in a variety of ways.The can:
- Clone' a complete set of parameters for serial production
- Save multiple complete sets of parameters
- Set up an application as parameter differences from default
- Automatically save all user parameter changes for
maintenance purposes
- Load complete motor map parameters
- Set up an application as parameter differences from default
- Read/write information from within SM-Applications and SM-Applications Lite
The drive only communicates with the when commanded to read or write, meaning the card may be hot swapped . |